Anritsu MT9083C2 ACCESS Master

The Anritsu MT9083C2 is an Ultra High-Performance Access Master, with an improved range with full support of 1 × 128 PON. This Anritsu model incorporates an optical light source for fiber identification estimations as a standard tool. The fiber identification estimation has a comparatively simple technique to approximate the area of a break point in an optical fiber. Utilizing the unit's optical light source to infuse light at a particular wavelength and regulation into the fiber under test, you would then be able to utilize a fiber identifier to find the break, by finding the segment of fiber where the signal drops off.

In this model, the adjustment of options compensates the difference in length and obtains improved splice location and loss measurement. You can utilize the IOR/BSC dialog box to choose one of the pre-set Fiber Types, which consequently sets the IOR (Index of Refraction) and BSC (Backscatter Coefficient) for the selected fiber type, or select "Other" and utilize the Numeric keypad to enter the wanted IOR and BSC settings.

Regardless of whether you require single mode and multimode testing capacities in a single unit or standard 1310 nm and 1550 nm installation wavelengths, in addition to 1650 nm with a filter for support testing, this ACCESS Master can be configured to meet your individual needs. This model has an expanded dynamic range up to 46 db, a significantly reduced testing time for common fibers spans between 10 km to 100 km, and the capacity to test ultra-long haul fiber spans.

The manual for this model is available on the ApexWaves.com website.