Anritsu MW8209A PIM Master

The Anritsu MW8209A PM Master incorporates a DTP that indicates the area for PIM issues inside the radio wire system and the separation to outside PIM sources outside the radio wire framework. The Distance-to-PIM test offers significantly more insight than traditional PIM tests. This data might accelerate repairs, control repair costs, and assist with plan budgets accurately. The comparison of PIM values over time can show if a gadget is deteriorating with time. This permits fault correction before a failure causes dropped or blocked calls.

PIM issues could be irregular and power sensitive; this is regularly the situation when PIM issues are just starting to appear. This can be expected as a result of light corrosion, high traffic loading, or changing weather conditions activating environmental diodes. Utilizing higher energy levels might often force otherwise intermittent failures to become visible.

Higher power levels might be needed to find faults over a multicarrier radio wire framework and to discover microscopic arcing in connectors. In many cases, PIM faults cannot be discovered with only 2 x 20 Watts of power. With the capacity to test at 40 Watts, the client could spot serious issues that cannot be seen on a 20 Watt PIM analyzer.

Saving and recalling setups makes it faster to run those same tests again and again in different places. Saving and recalling an estimation becomes a reference estimation at a place when the user return to check if there has been any deterioration since the last time the place was tested.

The manual for this model can be found on the ApexWaves.com website.