Keysight M9361A PXI Downconverter

The Keysight M9361A PXI Downconverter from Agilent/Keysight Technologies is enhanced for use with the Agilent PXI Digitizers in aviation and defense applications, such as radar and wideband signal capture, and wireless communication applications. This model from Agilent measures the signal ways from the LO IN and RF IN connectors to the SI OUT connector.

The M9361A has a SMA female connector that inputs a signal (2.75 GHz to 26.5 GHz) for downconversion. The working extent is - 30 dBm to - 160 dBm. Harm happens over 10 dBm. This modular PXI product also has a male SMB connector that is utilized to change to an outside IF flag (100 kHz to 500 MHz) legitimately to the IF OUT and to dodge the downconversion procedure of the M9361A. This IF signal is accessible straightforwardly from the IF OUT connector. All SMA connectors are torqued to 8 Lb-In (0.904 Nm).

This 1-slot PXI Downconverter has an LED that demonstrates the general status of the M9361A and is an outline of the accompanying LEDs, which spread power supplies and other equipment tasks. The M9361A has broad coordinated testing (BIT) and can distinguish explicit issues by looking at the status pointer on the front board. The activity checks of the Keysight PXI M9361A Downconverter measure the signal from the IN and RF IN connectors to the IF OUT connector.

M9361A paths are accurately set from the SFPs so that once the signal generator is set to the correct power/frequency, all links are legitimately associated.