National Instruments AT-MIO-16E-1 Multifunction I/O Device

The AT-MIO-16E-1 (Part Number: 777142-01) is a Multifunction I/O Device developed by National Instruments. The AT-MIO-16E-1 belongs to the AT-MIO/AI E Series of data acquisition (DAQ) devices. These devices utilize E Series technology to render high performance and DAQ capabilities. The NI AT-MIO-16E-1 can be utilized with multiple types of application software like LabView, Measurement Studio, and VI Logger. The NI-DAQ driver software is used to configure the AT-MIO-16E-1. This Multifunction I/O Device can only be operated on Windows 2000/NT/Me/9x operating systems.

The NI AT-MIO-16E-1 is the first device with unique features when compared to other DAQ devices. The AT-MIO-16E-1 is developed as a switchless and jumper-less DAQ device. The AT-MIO-16E-1 can be calibrated for three different kinds of input configuration: differential (DIFF) terminal configuration, RSE terminal configuration, and non-referenced single-ended (NRSE) terminal configuration. This Multifunction I/O Device uses the DAQ-STC time controller to meet requirements for time-related functions.

The AT-MIO-16E-1 device is configured with 16 analog input channels with an input voltage range from ±10 to ±0.05 V, 2 analog output channels with ±10 V output voltage, and 8 digital TTL/CMOS input/output lines. This Multifunction I/O Device comes with an input/output impedance of 10k Ω/ 0.1Ω. The NI AT-MIO-16E-1 comes with DC input/output coupling. The AT-MIO-16E-1 additionally has two 24-bit, 20 MHz timers to count up/down variations. This device is designed with a 68-pin male 0.050 D type connector. The NI AT-MIO-16E-1 Multifunction I/O Device delivers a high sampling rate of 1.25 MS/s.