National Instruments DB9F-DB9F CAN and LIN Cable

Designed to work with High-Speed, Low-Speed/Fault-Tolerant, and Flexible Data-Rate CAN signals, the DB9F-DB9F (Part Numbers: 193128-01, 193128-02, and 192017-02) is a CAN Cable. The NI DB9F-DB9F is available as a 1 or 2-meter cable with or without termination. This cable can work with a variety of National Instruments CAN, Multiprotocol, and LIN C Series modules. The DB9F-DB9F Cable comes with 9-Pin, Female D-SUB connectors on both ends. This cable is designed to comply with all the specifications as defined in ISO 11898.

With this cable, you can construct a flexible CAN-based system since it is designed to support various data transmission modes. The DB9F-DB9F can also be used with software-selectable LIN or CAN interfaces. The wire utilized in the construction of this cable is designed to operate at a resistance of 93 Ω/km. This CAN Cable comes equipped with a dedicated, twisted 24 AWG pair for CAN_L and CAN_H. A separate twisted pair is also provided for V+ and V-. However, you can only use this cable with the device powered CAN ports.