National Instruments SHB4X-8BNC Coaxial Cable

The SHB4X-8BNC is Coaxial Cable from National Instruments. This cable is used to establish a direct communication link between a sound or vibration acquisition card and a maximum of eight devices. This Coaxial Cable has a 16-Pin, Male InfiniBand (IB) Back End Connection and eight, 1-Pin, Male BNC connectors for the Front End Connection. The InfiniBand connector of this cable connects to an NI PXI-449x or NI PXIe-449x Data Acquisition Card.

Each one of the eight BNC connectors can be coupled to an accelerometer, microphone, or another kind of transducer. The NI SHB4X-8BNC Cable is available under the part number 780040-01. This cable comes in a two-pack because the NI-449x modules are offered with 2 InfiniBand interfaces. However, you can operate your vibration or sound acquisition system with a single SHB4X-8BNC Cable. This cable is equipped with high-quality shielding and insulation. The National Instruments SHB4X-8BNC Coaxial Cable can be used for data acquisition and precision measurements.