NI USB-7846R Multifunction Reconfigurable I/O Device

The USB-7846R is a Multifunction Reconfigurable I/O Device from the R Series. The USB-7846R device has been produced by National Instruments. National Instruments releases the NI USB-7846R with the part numbers 783201-02 and 783201-01. The USB-7846R Multifunction Reconfigurable I/O Device supports a USB 2.0 bus connector. The NI USB-7846R performs operations with the LabVIEW FPGA application tool. The USB-7846R device comes with a small signal bandwidth of 1 MHz and a large signal bandwidth of 500 kHz.

The NI USB-7846R Multifunction Reconfigurable I/O Device comes with a user-reconfigurable FPGA. The FPGA controller used in the USB-7846R device is a Kintex-7 160T FPGA. The NI USB-7846R incorporates 48 digital channels. These digital lines are bidirectional and can be used as inputs as well as outputs. The National Instruments USB-7846R Multifunction Reconfigurable I/O Device performs operations with a 500 kS/s sampling rate. The USB-7846R is incorporated with an 80 MHz clock frequency rate. The NI USB-7846R is also equipped with 16 analog channels. 8 of these channels are input channels, while the other 8 are output channels.

The NI USB-7846R Multifunction Reconfigurable I/O Device has analog DC input/output coupling. The USB-7846R has 3 DMA channels. The NI USB-7846R is operated on a 9-30 V range input voltage. The overvoltage protection of the USB-7846R Multifunction Reconfigurable I/O Device is 40 V. The USB-7846R device requires a maximum power of 20 Watts. The USB National Instruments USB-7846R Multifunction Reconfigurable I/O Device can safely operate in a temperature range of -40 °C to 70 °C. The USB-7846R device is fabricated with two 68-pin VHDCI I/O connectors.