National Instruments SSR-ODC5 Output Module for SSR

The SSR-ODC5 is a solid-state relay module used for output signals. The NI SSR-ODC5 is made by National Instruments. The SSR-ODC5 is a part of the SSR module Series by NI. The NI SSR-ODC5 Output Module can be ordered with the part number 776241-01. The NI SSR-ODC5 module is used for the transition of AC and DC loads based on the logic signals of TTL.

The National Instruments SSR-ODC5 Output Module represents an output DC voltage module for solid-state relays (SSR) offered by National Instruments. The SSR-ODC5 module controls additional devices linked with data acquisition (DAQ) devices. The NI SSR-ODC5 module incorporates a 50-pin connector for interfacing to devices. The SSR-ODC5 uses optical isolation for interfacing to computers. The SSR-ODC5 is capable of handling power signals. The NI SSR-ODC5 output module is designed similar to conventional relays.

The NI SSR-ODC5 Output Module has a few different features from conventional relays, such as load voltage, etc. The SSR-ODC5 module is prepared to operate on 60 VDC voltage. The NI SSR-ODC5 Output Module for SSR can be switched on by a low current. The SSR-ODC5 module is fabricated to be used with 5 mA current. The NI SSR-ODC5 delivers high-performance and is compatible with the SC-205x devices. The National Instruments SSR-ODC5 Output Module requires an operating temperature of -40 °C to 100 °C.

SSR-ODC5 Obsolete Status has been announced by National Instruments, but the Output Module for SSR will still be available for purchase and repairs by Apex Waves.