Spirent SmartBits LAN-3102A Ethernet SmartMetrics Module

The SmartBits LAN-3102A is an Ethernet SmartMetrics Module. The SmartBits LAN-3102A SmartMetrics Module is designed by Spirent Communications. The SmartBits LAN-3102A Ethernet Module is equipped with 2 ports featuring half as well as full-duplex operation. For sites requiring a portable testing device, the SmartBits LAN-3102A Ethernet Module is designed to work with the SmartBits SMB-600 Chassis. Additionally, the SmartBits LAN-3102A SmartMetrics device can also be installed in the SMB-6000B Chassis as well. In both the chassis, the SmartBits LAN-3102A occupies only one slot when installed. 

The Spirent SmartBits LAN-3102A module is one of the low-cost testing devices present in the industries. The testing of a simple DUT, as well as an intricate network, can be efficiently, economically, and reliably accomplished with the help of the SmartBits LAN-3102A module. The SmartBits LAN-3102A module contains a wide range of promising features to monitor, test and authenticate the Layer 2 and 3 DUTs. The SmartBits LAN-3102A Ethernet Module can perform 10/100 Mbps transmission with 1000 streams per port. Up to 4 billion data packets per burst and 4 billion-packets bursts reoccurring with customizable delay time can be transmitted with the help of the SmartBits LAN-3102A module in single burst and multi-burst modes, respectively.  

The SmartBits LAN-3102A module features a frame length of 18 to 2,006 bytes in data capturing and 24 to 1,600 bytes in data transmission mode. The network devices can be tested for their stress and capacity limit with the help of the SmartBits LAN-3102A module as this module can generate and evaluate the traffic at full wire rate. The interface of the SmartBits LAN-3102A module complies with the IEEE standard specifications 10 Base-T and 100 Base-TX.