Tektronix TDS3034C Oscilloscope

The Tektronix TDS3034C Oscilloscope has a sample rate on each channel of 2.5 GS/s, a rise time of 1.2 ns, 300 Hz of Bandwidth, 4 Input channels, and a Display Memory Depth of 10 kpts. This model has an HTTP port that sets the estimation of the system HTTP socket for the oscilloscope. This field enables the user to configure the oscilloscope as an e * Scope web server in a port other than the default port 80. This is helpful to keep away from conflicts with existing web servers; they utilize a similar IP address through a switch and the default esteem is 80. When operating this model, always utilize a ground lead when testing a circuit to minimize noise pickup and signal abnormalities. Associating the ground lead to a point close to the signal source usually provides the best results. Long ground leads can cause false ringing and abnormalities in the acquired waveform that are not in the real signal. To see the best signal fidelity, utilize the briefest conceivable ground lead.

In this Tektronix model, the tests with the TekProbe interface consequently communicate with the oscilloscope to set the test type and attenuation factor. On the off chance that the user implements a test without the TekProbe interface, the user can set these parameters in the Vertical menu for the channel that the test is associated with.

If you want to learn more about this model’s specifications, special features, and options, you can read its manual, which is available on the ApexWaves.com website.