Anritsu 69159A Synthesized CW Generator

The Anritsu 69159A has an ALC power slot function integrated for directly incrementing or diminishing the output control, as indicated by the recurrence increments to repay the framework, cable, and varieties of the waveguide because of changes in recurrence. The SL1 summon turns on the ALC control slope function. The estimation of the power slope is changed utilizing the SLP command, while the recurrence of the rotate point is changed utilizing the PVT command. The SL0 summon turns off the ALC power slot function.

In the Unlocked FM modes, the YIG phase-lock loop is disabled to allow peak FM deviations up to 100 MHz. In the Unlocked Narrow FM mode, recurrence balance is received by applying the regulating signal to adjusting the fine-tuning coil of the YIG-tuned oscillator. The Unlocked Narrow FM mode permits maximum deviations of 10 MHz for DC to 500 kHz rates.

The Anritsu 69159A has two accessible AM modes: Linear and Log. In Linear AM mode, the sensitivity is variable from 0%/V to 100%/V and the amplitude of the RF output changes as the AM input changes. The AM1 command turns on the outer AM function in Linear mode. In Linear AM mode, the AM sensitivity value is changed by utilizing the AMS command.

The Anritsu 69159A has SWP or SSP commands that give a sweep recurrence output. The user can only determine if the swept recurrence output will be an analog sweep or step by step. If a recurrence sweep is being issued by the 69159A when one of these commands is received, the sweep accepts the orderly sweep mode.