Anritsu 69247A Synthesized Signal Generator

The Anritsu 69247A Synthesized Signal Generator has four range initiation modes: sweep-automatic, external, single, and manual. When the automatic, external, or single trigger mode is chosen, the exit sweeps between the predefined list the begin and end records, in each list file for the predetermined dwell time. While in manual shooting mode, stop list is selected and the dwell time parameters are not utilized. Conversely, the file of the list increments or declines by utilizing the cursor control key on the front board. In the manual activation mode, the file of the list can also be expanded by the utilization of an outside activation input. Each TTL trigger expands the record of the list in one.

With Auto trigger is selected and the dwell time-per-step is set to a small value, the user will notice updating slows down. This guarantees that the sweep speed is not unfavorably influenced. Because of this potential display update slow down, when leaving List Sweep mode with Auto trigger selected for another mode, Auto trigger is automatically turned off and Manual trigger is chosen. Hence, when List Sweep mode is entered, the display updating will have returned to ordinary speed.

In the CW power sweep mode included in this model, output power steps between any two power levels at a solitary CW recurrence. Menus allow the user to set or select the sweep range, the step size, the dwell time-per-step, and the sweep trigger.

The manual for this model is available on the ApexWaves.com website.