Anritsu 69347B Signal Generator                      

The RF output of the Anritsu 69347B is monitored in a Spectrum Analyzer display. The IF (modulated) output of the signal analyzer is monitored with a Modulation Analyzer. At half AM, default esteem is set up at a reference point in the range analyzer. The current modulation esteem is calculated from the indicated adjustment meter esteems. For the absolute estimations of AM PK + and AM PK, the readings are utilized as part of the offered equation to make up for the non-linearity mistakes in the test equipment.

Pulse calibration tests check activity, as well as rise time, fall time, overshoot, and level. The pulse leveling precision test compares the pulsed RF output level to confirm the execution of the level detector(s), indicator amplifiers, and ALC sample/hold circuits. The incorporated Filter Shaper DAC controls the gain of the enhancer as an exchanged channel. Every recurrence band will be filtered for the base without leveling the power point before programmed change of the DAC.

The Anritsu 69347B Signal Generator’s firmware incorporates inner diagnostics that self-assess the instrument. These individual tests perform a short trial of going/not going for most of the instrumental PCBs and other inside sets. If the Signal Generator fails the individual test, an error message(s) is shown on the front board information display. These mistake messages describe the malfunction and, much of the time, give a sign of what has failed.

If you are interested in this model and you want to learn more about its options, specifications, and special features, you can check its manual, which is available on the ApexWaves.com website.